Airsoft Canada - View Single Post

e-luder · February 1st, 2013, 22:16

Yes. the last picture is what i am refering to.

The black thing may be too long. So when the slide recoils, the full brunt is absorbed by the nub (the part that breaks) and the plunger (the black piece). Ideally you want to cut it a bit so that the slide wont slam those two together.

The spring needs proper amount of distance to coil before it hits that nub so the force can be dampened.

It's not WE's fault but also some Marui systems have that piece break fairly easily. I assume WE's mould is a bit off spec. Which would explain why theseproblems are so common in WE Glocks... The spring itself is a bit weak so it only exarterbates the priblem furter

February 1st, 2013, 22:16	#29
e-luder Trader rating Join Date: Aug 2011 Location: Centre Mass	Yes. the last picture is what i am refering to. The black thing may be too long. So when the slide recoils, the full brunt is absorbed by the nub (the part that breaks) and the plunger (the black piece). Ideally you want to cut it a bit so that the slide wont slam those two together. The spring needs proper amount of distance to coil before it hits that nub so the force can be dampened. It's not WE's fault but also some Marui systems have that piece break fairly easily. I assume WE's mould is a bit off spec. Which would explain why theseproblems are so common in WE Glocks... The spring itself is a bit weak so it only exarterbates the priblem furter __________________ "May you fight with the strength of ten full grown men." Last edited by e-luder; February 1st, 2013 at 22:19..