Airsoft Canada - View Single Post

Afflicted · February 1st, 2013, 20:10

Update..

I tried a nozzle from a TM glock and its significantly different than the WE.. Specifically, I tried one from a glock 18.. From about the 11 o'clock to 1 o clock positions, the TM one was flat whereas the WE one is perfectly round.

Next up, I tried a KJW which is almost identical with the exception of a small nub if you will on the opposite site of the return spring stop. This could easily be filed or ground down.. However.. There is a plunger type dealy with a spring that goes inside the WE nozzle that doesn't fit inside the KJW.. Also, the KJW nozzle seemed to be about 2 mm shorter than the WE which probably wouldn't make too much of a difference. I was thinking of drilling a little out of the KJW To allow for the bigger plunger thing but decided against it..

Back to square one..

I'm going to modify the stock one like eluder mentioned.. Anyone still have the manual with the part number for the nozzle? And return spring if possible..

This gun is starting to make me frustrate..:rocket:

February 1st, 2013, 20:10	#22
Afflicted Trader rating Join Date: Dec 2012	Update.. I tried a nozzle from a TM glock and its significantly different than the WE.. Specifically, I tried one from a glock 18.. From about the 11 o'clock to 1 o clock positions, the TM one was flat whereas the WE one is perfectly round. Next up, I tried a KJW which is almost identical with the exception of a small nub if you will on the opposite site of the return spring stop. This could easily be filed or ground down.. However.. There is a plunger type dealy with a spring that goes inside the WE nozzle that doesn't fit inside the KJW.. Also, the KJW nozzle seemed to be about 2 mm shorter than the WE which probably wouldn't make too much of a difference. I was thinking of drilling a little out of the KJW To allow for the bigger plunger thing but decided against it.. Back to square one.. I'm going to modify the stock one like eluder mentioned.. Anyone still have the manual with the part number for the nozzle? And return spring if possible.. This gun is starting to make me frustrate..:rocket: Last edited by Afflicted; February 1st, 2013 at 20:20..