So we just got one of these and we're starting to fuck around with it.
btc chimera preview - YouTube
In other news, we're starting to work on the microFETs and standard FETs and have the sizing for the standard FETs now. These are the aforementioned IRLB3034-based FETs with TVS diode protection, 16awg of teflon coated milspec wire, etc, instead of no TVS and shitty Deans wet noodle wire with insulation that tears at the sight of a sharp edge.
The dimensions of the Basic MOSFET with no fuse are as follows:
Length: 40mm
Thickness: 13mm
Width: 17mm
The dimensions of the Basic MOSFET with polyfuse are as follows:
Length: 52.5mm
Thickness: 15mm
Width: 18mm
The microFETs do not have TVS or polyfuse so they're meant for tight spaces and lower-power applications where you're not running an M130+ spring on highspeed gears and a Neo motor. The FET itself has some internal diode protection but more testing needs to be done if it can hold up to the increased RF noise generated by neo motor use. This will most likely be introduced later on.