Airsoft Canada - View Single Post

Aurelien · March 19th, 2012, 01:29

I installed the Element UBR on my WE416 and the buffer tube fit like a dream. Only thing I had to do was cut down the nylon spacer to allow enough bolt travel (to a total of 22mm iirc, but it was several years ago). Its been a great stock, and I'm exceedingly happy with it.

Edit, I also sourced some very small washers to go around the little screws that hold the top cover on, as they were slightly too long and I didn't want to try cutting them down).

I have seen reports on gasguns.info that the PTS tubes do fit, but only after some serious filing, possibly the height of the threads? I'd do a search on there to verify that before you do anything though.

March 19th, 2012, 01:29	#8
Aurelien Trader rating Join Date: Sep 2009 Location: Auckland NZ	I installed the Element UBR on my WE416 and the buffer tube fit like a dream. Only thing I had to do was cut down the nylon spacer to allow enough bolt travel (to a total of 22mm iirc, but it was several years ago). Its been a great stock, and I'm exceedingly happy with it. Edit, I also sourced some very small washers to go around the little screws that hold the top cover on, as they were slightly too long and I didn't want to try cutting them down). I have seen reports on gasguns.info that the PTS tubes do fit, but only after some serious filing, possibly the height of the threads? I'd do a search on there to verify that before you do anything though. __________________ Canadian living in NZ. Last edited by Aurelien; March 19th, 2012 at 01:33..