|
So i received the SRC.
Not firing right off the bat - From what i've narrowed it down to, the motor is not strong enough to pull the stock spring it has inside.
I grabbed my trusty JG High torque to give it a shot - the pinion gear size is different! So i can't even try it out to see if it works.
Because it was the stock spring I didn't really give a shit about - I nipped a couple rings off it then stretched it out to see if that would help, still nothing - not firing.
Mind you the gears turn just fine, nothing is jamming or ceasing - even when I have the motor outside of the mechbox and a battery hooked up, pulling the trigger still gets the motor to spin and operate - its just when I slip it inside.
Damn you SRC and your bargain prices!
|