|
Without that spring your gun will probably work well in full auto, but the trigger will hang in semi and will have to be manually reset. The full auto trigger will feel spongy and soft but will probably function.
When you reassemble, make sure the spring and trigger are in properly. You can do as Cdn_Stalker or set it up before you bring the right side in at all. Marui ones will just sit there but many clone boxes can't hold it. Add a little weight to the trigger and it will stay for you. I often use the screwdriver handle of the driver I am using for the assembly of the box. Once the box is together properly the trigger is ready to go.
If it is not your spring, but the trigger itself is slipping off of the trigger block then you need a new trigger. Get steel and it won't happen again.
|