Quote:
Originally Posted by Neurotrauma
I tested it once, with the fuse removed and the two halves connected, just one shot on semi to test the motor with it outside the handgrip, and it is still functionning. The polarity is correct, could I be putting the motor in the wrong way?
|
The motor height could be too tight.
Quote:
Originally Posted by Neurotrauma
could it still be a short if its working with no fuse?
|
No
Quote:
Originally Posted by Neurotrauma
I dont think I moved anything with the shims??? only the first gear and the anti reversal latch came off and i put them back on as the video directed...
|
Did you check to see if they could spin freely after you closed up the box? (Do it with the spring removed)