|
Modding a P90 to have internal illumination (at the hop-up/mag joint) is stupid easy.
There is plenty of room on both sides of the hop-up unit.
There is also quite some space above it.
The BBs are travelling in a clear magasine, close to the surface of the gun along the body.
You just need to make a hole (I would say about 15mm long by 4mm) and install 4x UV 1500mc LEDs (they are about 5-6$ each, you have to ask at the counter in electronic supply stores, forget about The Source). It will have PLENTY of time to charge-up the BBS just before the feed to the hop-up and at 6000mc, you will get roughly the same power as a TM/Madbull tracer. Plus since it's UV, you will see a weak purple glow from under the magasine. At 4' it won't be visible anymore.
Finally, rig it to your main battery, with a NO switch to detect the magazine-in condition and turn off the system when no mag is in.
__________________
Quote:
Originally Posted by Drake
Damnit, don't make me add "no discussing temporal paradoxes" to the rules or I'll go back in time and ban you last week.
|
|