Airsoft Canada - View Single Post - REVIEW: AN/PRC-148 MBITR, working replica by United-Star

S.E.A.L. · February 6th, 2011, 06:29

Now I have also a few problems with the function "read". I can't read data from the MBITR. I worked a few times well but now I got the Error Message "Data Fail".
"Write" works without any problems.

Also I can't "Reset" the MBITR. And can tell my anyone how to listen on a second channel ?
1. Step: Press the "Alt" Button
2. Step: ??? When I press the "Dual-watch operation" Button I will go into the MBITR's Menu -> WTF ?

Yesterday I write 15-16 PMR channels to the MBITR and also 15-16 PMR channels with CTCSS Codes.
When you try to write CTCSS Codes to your MBITR and get a Error Message like "94.8 is not a valid floating point value", check your country/area settings in your system controll.

Also since 2 days I have my Sordin Dual Comm Headset.
To plug on the PTT's you must take out the O-Ring which is inside the audio connector.
After that the MBITR works with the Sordin BUT incoming signals are a little bit quiet. The transmitting signals from me are really good. What should I do now ? Did anybody here a modification to his Sordin Headset ?

Also ... Toysoldier U-94 5-Pin PTT Unit will not work with the MBITR. When you plug it on it will transmitting all the time.

If anybody get contact to the producer of this MBITR, can you please them to publish a new manual and a new version of the programming software ?

February 6th, 2011, 06:29	#146
S.E.A.L. Trader rating Join Date: Dec 2010	Now I have also a few problems with the function "read". I can't read data from the MBITR. I worked a few times well but now I got the Error Message "Data Fail". "Write" works without any problems. Also I can't "Reset" the MBITR. And can tell my anyone how to listen on a second channel ? 1. Step: Press the "Alt" Button 2. Step: ??? When I press the "Dual-watch operation" Button I will go into the MBITR's Menu -> WTF ? Yesterday I write 15-16 PMR channels to the MBITR and also 15-16 PMR channels with CTCSS Codes. When you try to write CTCSS Codes to your MBITR and get a Error Message like "94.8 is not a valid floating point value", check your country/area settings in your system controll. Also since 2 days I have my Sordin Dual Comm Headset. To plug on the PTT's you must take out the O-Ring which is inside the audio connector. After that the MBITR works with the Sordin BUT incoming signals are a little bit quiet. The transmitting signals from me are really good. What should I do now ? Did anybody here a modification to his Sordin Headset ? Also ... Toysoldier U-94 5-Pin PTT Unit will not work with the MBITR. When you plug it on it will transmitting all the time. If anybody get contact to the producer of this MBITR, can you please them to publish a new manual and a new version of the programming software ?