|
im using silver plated copper wire with a ptfe jacket and deans connectors. I removed the old wires and used an extra v2 wiring harness I had laying around. Im thinking I will try a completely new harness and go from there. It is not set up for a mosfet. Standard wiring config. This build was put together with a multitude of parts I had from other stuff. I had an 8mm Matrix gb with an extra set of KWA gears. Then a Madbull ulimate hopup and Madbull metal body and a Prommy tbb. The front section was from a KWA sr10. I had zero issues before the metal body, so maybe the gb is too big or something and is contacting the metal body and shorting. IDK.
|