Airsoft Canada - View Single Post

Evil_yd · October 31st, 2010, 22:48

I recently purchased a used CA90 TR from a guy who plays in my area, i knew it wasn't working but i figured i could fix it. I have identified that the cut off lever is broken but that would only cause semi to not function but here is my problem.When i fire the gun BB's just roll out of the barrel, i did a quick test with the mech box out of the gun and when the trigger is pulled the air nozzle goes back and forth but never stops at the same postion once you stop pulling the trigger, i would think that when you stop shooting that it would remain in the closed postion.

Help or insight would be much appreciated.

this is my first repair so be gentle.

October 31st, 2010, 22:48	#1
Evil_yd Trader rating Join Date: Sep 2010 Location: St.Jean sur Ricleieu QC.	CA90 TR shooting problem I recently purchased a used CA90 TR from a guy who plays in my area, i knew it wasn't working but i figured i could fix it. I have identified that the cut off lever is broken but that would only cause semi to not function but here is my problem.When i fire the gun BB's just roll out of the barrel, i did a quick test with the mech box out of the gun and when the trigger is pulled the air nozzle goes back and forth but never stops at the same postion once you stop pulling the trigger, i would think that when you stop shooting that it would remain in the closed postion. Help or insight would be much appreciated. this is my first repair so be gentle.