Airsoft Canada - View Single Post - Airsoft / Clearsoft

jomor · August 11th, 2010, 20:55

1) Manufacturer
KWA KG36C CAS version

2) Date Obtained
November 2008

3) Initial Cost
$340.00

4) New or Used
New

5) Mechanical Problems
1. Broken tappet plate and cylinder head around 1000 rounds
2. Broken Saftey selector around 2000 rounds

6) Esthetic Problems
Clear lower receiver has some cracks, every screw hole and the upper are where the rail attaches

7) Rounds fired between failures
1000

8) Changes to Internals and Externals
Lets see..New piston, piston head, down grade spring(was shooting 430fps, Fire selector worked on, and added a tight bore

10)Notes and Comments
This would be a great gun if it was solid polymer and not that crap plastic. Secondly it was shooting hot out of the box I'm sure that is why it broke down on me and I'm sure contributed to the cracking.

August 11th, 2010, 20:55	#352
jomor Trader rating Join Date: Oct 2008 Location: Ottawa	KWA G36c 1) Manufacturer KWA KG36C CAS version 2) Date Obtained November 2008 3) Initial Cost $340.00 4) New or Used New 5) Mechanical Problems 1. Broken tappet plate and cylinder head around 1000 rounds 2. Broken Saftey selector around 2000 rounds 6) Esthetic Problems Clear lower receiver has some cracks, every screw hole and the upper are where the rail attaches 7) Rounds fired between failures 1000 8) Changes to Internals and Externals Lets see..New piston, piston head, down grade spring(was shooting 430fps, Fire selector worked on, and added a tight bore 10)Notes and Comments This would be a great gun if it was solid polymer and not that crap plastic. Secondly it was shooting hot out of the box I'm sure that is why it broke down on me and I'm sure contributed to the cracking. Last edited by jomor; August 28th, 2010 at 17:52..