|
T1 mount question - not sure if it fits here, but I figure someone here might have a solution/answer.
Got the "Big Dragon" T1-specific mount from eHobby with the G&P T1 - the mount holes do NOT line up with the mount itself. The longitudinal distance between the mount holes is shorter than the mount holes on the T1. It seems to hold securely enough with just two bolts... but I haven't had the mount mounted to my Hi-Capa yet and test fired it to see if the T1 will hold a zero as is.
Any ideas if I should a) modify the mount to accommodate the T1, b) modify the T1 to accommodate the mount, or c) screw it - 2 bolts will do? By modify, I mean drill new holes.
Speaking of drilling holes, I'm going to get a friend to do the drilling/fitting and all that, as he has access to the proper equipment. Are there any things I should let him know about in terms of mounting the mount? AFAIK, the mount should be attached level with the frame... but short of that, I don't know anything else, and I don't know if there are any tricks/hints out there for that.
|