Quote:
Originally Posted by turok_t
So after reading through this entire thread, im contemplating on whether i should remove the mound inside my Guarder Soft or my Prometheus Soft bucking. I do have the tools, and I do have the patience (as you have seen from my other modification threads) in removing the mound. I guess the best thing to do is try the SCS without removing the mound in the soft bucking and seeing if im satisfied with the results. If not, I can try to remove it and retest it again. Any other suggestions?
|
I would not do that. If you do not cut the Mound down 100% even accross the contact point your going to have a very inconsistant hopup. Plus guarder clears are very soft and plyable and will conform to the shape of the SCS great. Just spend the time to make sure it is alligned in the hopup chamber and you should be good to go.
__________________
All right, they're on our left, they're on our right, they're in front of us, they're behind us... they can't get away this time!
- Lieutenant General Lewis B."Chesty" Puller (when surrounded by 8 enemy divisions)
Born to fight, trained to kill, ready to die, but never will.
|