Quote:
Originally Posted by KND
Is it the one that I show you in PM ? oh ! yeah, It has enough juice to run 400 fps run easily even a PTW. I even tested on mine with blue cylinder before it sold.
and Yes, it fine in G&P buffer tube without problem except if that buffer is not Lipo specific, you might not be able to put your stock in zero position, it's possibly start from second position. We won't use it in zero position anyway.
|
Actually, the one you sent me was 11.1V and the one im interested is the G&P 7.2V. I just wanted to make sure that it would be provide sufficient amperage to my stock CA gun since this article i read (
http://infectedairsoft.wordpress.com...teries-part-1/) said that you need 30A and the G&P lipo I want only provides 24A..
Anyways, do you think I should stick with the G&P lipo charger to match my G&P lipo battery or go with something else? Im looking for a cheap charger, but also, a charger that doesnt explode on me..
As Im doing my research now, it seems that alot of people use "alarms" to ensure their lipos dont drop below 3V. Ive saw some alarms on ebay and some on hobbyking.com. Which alarm provides the MOST accurate reading? (KND, i read your other posts saying that most of them are not accurate, and that the preferred method is to use a multimeter). Im looking for something that can provide me accurate readings while im using my gun. I thought about a trigger mosfet but that is waaaaay over my budget.