|
alrighty... thanks for the repost mack... but this is the situation:
Brand new gun - fired off a few hundred rounds... just playing around... gun stopped firing but continued to make the noise of a dry fire... so no ammo (you probably knew that but w.e im new).... so i figured its just the mag to wind up... did that nothing.. still a dry fire; pulled the trigger to try it after winding the bottom of the mag... the dry fire continued for 4 pulses... then nothing but a drilling noise.
Now; as for the bottom of the grip as to where the motor should be adjusted according for height.. the allen key spot.. does not exist.. there are 4 wholes.. 3 of which are filled in with 2 small screws.. and 1 larger screw... the 4th whole is the designated whole for the allen key i would assume... if thats the case i have cycled through several different sizes for the keys... all of which have not been able to bite the sides of where to turn/grip.
If you need any more info please lemme know.... Thanks guys; appreciate the help
|