On the other BBBMax threads I've been saying the EXACT same things for a while now. Safe for airsoft, bio inert. Excellent shot to shot consistency.
I've shot these things at 700FPS with a Tanaka M700 on a 30 degree day with the power bolt. They don't break against the fence, and they didnt penetrate a 0.1mm thick lexan RC car shell at point blank range. To get this thing to shatter is going to take MUCH more force. I'll have to dig up the PM but scarecrow has had a lab test done
Quote:
Originally Posted by scarecrow
Data
Softening Point 1683°C
Density 2.20 x 103Kg/m3
Annealing Point 1215°C
Strain Point 1120°C
Rigidity Modulus 32 x 106KN/m2
Continuous Operating Temp 1000°C
Compressive Strength 20 x 106KN/m2
Electrical Information
Tensile Strength 70 x 103KN/m2
Electrical Resistivity 2 x 1019 ohm cm at 20°C
Shear Strength 70 x 103KN/m2
2 x 106 ohm cm at 800°C
Moh’s Hardness 6
Dielectric Strength 10KV/mm at 20°C
Total Metallic Impurities 10ppm (Typical)
|
__________________
Do you know what ruins airsoft?
(Chair), (Drama), (Air), (Sugar) softers, filthy casuals
---
Quote:
Originally Posted by mcguyver
it would appear I am not first up in this gang-bang
|
---
WANTED PTW Receiver PRIME, STG, Factory