[Lakonian]

From : ylasfar
To : Lakonian
Date : 2009-07-29 03:09
Title : VFC AK74U Samson rail
--------------------------------------------------------------------------------
Hi,

i have one, http://www.airsoftcanada.com/showthr...&highlight=vfc

its the pictures of the gun that i bought and it came with it.

Its a very rare item, not sold in US or Canada. Its 91 $ US in Japan, before shipping , conversion, customs etc etc etc..

so my firm price for it would 175 $ Shipped.

let me know if ur interested.
______________________________________________

From : Lakonian
To : ylasfar
Date : 2009-07-29 12:44
Title : Re: VFC AK74U Samson rail
--------------------------------------------------------------------------------
Yeah, I think I can do that.

I can only use EMT though. I hope that's not an issue.

Cheers

_____________________________________________

From : Lakonian
To : ylasfar
Date : 2009-07-29 13:10
Title : Ahh! Yes.
--------------------------------------------------------------------------------
Okay, I noticed your signature. EMT is good to go, pending my payment from work (in about 6 hours ).

I will buy the rail no matter what [referring to money transfer. Context supports this. Also, damage was mentioned AFTER.] , but in the event that I fall short, is it possible for me to cover cost of the rail (I'm assuming 165ish), and send an EMT the following week for the shipping?

Send me your info when ya can
Cheers

______________________________________________


From : ylasfar
To : Lakonian
Date : 2009-07-29 13:31
Title : Re: Ahh! Yes.
--------------------------------------------------------------------------------
sounds good, EMT email is CHOPPED

one thing i have to warn you about though, some screws dont hold anymore, they lost some of the grip, so u'll have to use some hardware stuff or glue to keep them tight. Let me know if that changes anything for you.

thanks,

____________________________________________

From : Lakonian
To : ylasfar
Date : 2009-07-29 13:40
Title : Re: Ahh! Yes.
--------------------------------------------------------------------------------
Hmm. Which screws are we talking about here? Are they important?

Thanks
_____________________________________________

From : ylasfar
To : Lakonian
Date : 2009-07-29 13:56
Title : Re: Ahh! Yes.
--------------------------------------------------------------------------------
i am leaving for work right now, i'll have a look at it when i come back ...

Originally Posted by Lakonian

Hmm. Which screws are we talking about here? Are they important?

Thanks

___________________________________________

From : Lakonian
To : ylasfar
Date : 2009-07-29 23:39
Title : Re: Ahh! Yes.
--------------------------------------------------------------------------------
Hey, are you willing to take $165? I can that over right now

____________________________________________


From : ylasfar
To : Lakonian
Date : 2009-07-29 23:41
Title : Re: Ahh! Yes.
--------------------------------------------------------------------------------
ok, sounds good, but like i said, they`re some screws that are loose, like u screw over n over again but it doesnt get tighter kinda screws.....

i`ll ship it tomorrow, let me know ur address.

Originally Posted by Lakonian

Hey, are you willing to take $165? I can that over right now

[Typo: I can hand that over right now ]

_____________________________________________

From : Lakonian
To : ylasfar
Date : 2009-07-30 00:02
Title : Re: Ahh! Yes.
--------------------------------------------------------------------------------
I think I can get my gunsmith to work it out.

ADDRESS CHOPPED
PASSWORD CHOPPED

____________________________________________

From : Lakonian
To : ylasfar
Date : 2009-07-30 22:15
Title : Re: Ahh! Yes.
--------------------------------------------------------------------------------
Hey bud! Saw you accepted the EMT

Please let me know when everything's been shipped and whatnot. Much appreciated!

Cheers

____________________________________________

From : ylasfar
To : Lakonian
Date : 2009-07-30 23:05
Title : Re: Ahh! Yes.
--------------------------------------------------------------------------------
Hi, i worked double shift today n didnt have time to ship, will ship it tomorrow ( Friday ).

sorry for the inconvenience,

Originally Posted by Lakonian

Hey bud! Saw you accepted the EMT

Please let me know when everything's been shipped and whatnot. Much appreciated!

Cheers

_____________________________________________

From : Lakonian
To : ylasfar
Date : 2009-07-30 23:08
Title : Re: Ahh! Yes.
--------------------------------------------------------------------------------
No problem

Just give me the heads up when you do.

Cheers!

_____________________________________________


From : ylasfar
To : Lakonian
Date : 2009-08-01 02:08
Title : Re: Ahh! Yes.
--------------------------------------------------------------------------------
Hi,

was shipped out today express, tracking number is : 0103289000017225

Originally Posted by Lakonian

No problem

Just give me the heads up when you do.

Cheers!

___________________________________________

[NOTE: I opened the package, and placed the unit on my desk. Went to run some errands, gave it a detailed inspection afterwards]

From : Lakonian
To : ylasfar
Date : 2009-08-04 17:40
Title : Re: Ahh! Yes.
--------------------------------------------------------------------------------
Got it

It's very nice. Thanks for the speedy shipping

Trader ratings will be left immediately!
Cheers!

________________________________________

From : Lakonian
To : ylasfar
Date : 2009-08-04 19:53
Title : Issues
--------------------------------------------------------------------------------
Hey, just freed up some time to try and install this thing, but, it doesn't seem to want to stay.... Also, 3/4 of the side screws refuse to stay in......

[NOTE: The way this unit works by pinching the barrel at it's base (via a vise-grip mechanism) where it connects to the trunnion. It is semi-freefloated, which means that it has NO OTHER contact with the barrel other than the aforementioned. So, if there is any stripped screw in this area, the unit becomes unserviceable. Much more so if the inserts are stripped too. ]
_______________________________________

From : Lakonian
To : ylasfar
Date : 2009-08-04 21:55
Title : Re: Issues
--------------------------------------------------------------------------------
I tried again, but noticed the rail's threads (and little inserts) are stripped aswell it seems. If it were just the screws, I wouldn't have a problem (gunsmith would've been able to take care of it).. However, this piece is totally unusable.

Listen, here's what I'll do.. I'll send back the kit, pay for shipping, and I'd only want 140 in return. I think this is fair, all considered.

Thanks.

____________________________________________

From : ylasfar
To : Lakonian
Date : 2009-08-04 21:41
Title : Re: Issues
--------------------------------------------------------------------------------
Hi,

I gave u all the parts that came with the RIS, maybe make sure you use all the parts. About the screws, i told you about them not holding in and i told u that i could check it out more to give you a proper statement about its condition, but u told me to just ship it and u`ll have it checked out by ur gunsmith...

on what gun are u trying to install it on ? they`re meant for AK74U only..

i dont have any instruction manual about the RIS, maybe look if theres a youtube video about how to install it or something.

hope it helps,

Originally Posted by Lakonian

Hey, just freed up some time to try and install this thing, but, it doesn't seem to want to stay.... Also, 3/4 of the side screws refuse to stay in......

____________________________________________

From : Lakonian
To : ylasfar
Date : 2009-08-10 01:33
Title : Re: Issues
--------------------------------------------------------------------------------
Did you receive my pm?

Listen, I think I'm being more than reasonable considering you sold off a piece that wasn't serviceable at all..

$140/165 refunded, and it'll be shipped back on me. This is extremely fair.

Get back to me as soon as possible, or I'll be forced to take this a step further.
Thanks.

_______________________________________
From : ylasfar
To : Lakonian
Date : 2009-08-10 08:04
Title : Re: Issues

Hi,
sorry no refunds, i do not offer a return policy. I stated the condition of the RIS and u told me u can fix it with ur gunsmith, i even offered to check it out more to give u a more precise analysis, but u wanted me to ship it ASAP.

so, sorry, no refund.

_______________________________________

From : Lakonian
To : ylasfar
Date: 2009-08-10 12:47
Title: Re: Issues

You didn't state the extent of the condition. You only said the screws. If that were the case, then yeah, the smith would be able to fix it. But the threads on the inserts are bored out.

And I never said "send asap". I said "I think I can get the smith to work it out". If there were any doubts of this, as a good seller, it'd be your responsibility to inform me. This is how good trade is conducted.

So, if you're certain that you will not give a partial refund, I'll be forced to go to lengths which will ensure a full refund, and possibly some other headaches for yourself.

Thank you.
_______________________________________



I can get photo documentation in about 10 hours if you need to have a hearty facepalm.

Cheers.


[If mods need a raw file, I can email it. ]