Airsoft Canada - systema turbo motor on g36

Airsoft Canada (https://airsoftcanada.com/forums.php)

- Upgrades & Modifications (https://airsoftcanada.com/forumdisplay.php?f=24)

- - systema turbo motor on g36 (https://airsoftcanada.com/showthread.php?t=96747)

SGT_Blaster

January 14th, 2010 15:05

systema turbo motor on g36

HI Guy

I want to know what i need to change in my gearbox if i put a systema turbo motor??? I have a Tm g36 gear box version 3 .And if i change the motor i will have a better rate of fire ???????

thank

Skruface

January 14th, 2010 17:24

Quote:

Originally Posted by SGT_Blaster (Post 1142064)

HI Guy

I want to know what i need to change in my gearbox if i put a systema turbo motor??? I have a Tm g36 gear box version 3

You will need metal bushings for sure. I'd also install a sector chip to ensure reliable high-speed feeding. I'd also buy a spare piston, as your piston will wear out sooner or later.

Quote:

Originally Posted by SGT_Blaster (Post 1142064)

.And if i change the motor i will have a better rate of fire ???????

Yes.

SGT_Blaster

January 14th, 2010 22:13

Quote:

Originally Posted by Skruface (Post 1142157)

You will need metal bushings for sure. I'd also install a sector chip to ensure reliable high-speed feeding. I'd also buy a spare piston, as your piston will wear out sooner or later.

For the sector chip i see in google a picture but i dont find on ehobbyasia this sector chip ??????? For the metal bushing it sure i will replace and for the piston to.

deep in the bush

January 14th, 2010 22:24

Quote:

Originally Posted by SGT_Blaster (Post 1142352)

For the sector chip i see in google a picture but i dont find on ehobbyasia this sector chip ??????? For the metal bushing it sure i will replace and for the piston to.

airsoftparts.ca

try juggelz for the sector clip. I bought 4 off him recently

SGT_Blaster

January 14th, 2010 22:35

Thank i always forgot to go on airsoftparts.ca lol

Quote:

Originally Posted by deep in the bush (Post 1142363)

airsoftparts.ca

try juggelz for the sector clip. I bought 4 off him recently

SGT_Blaster

January 14th, 2010 23:33

Quote:

Originally Posted by Skruface (Post 1142157)

You will need metal bushings for sure. I'd also install a sector chip to ensure reliable high-speed feeding. I'd also buy a spare piston, as your piston will wear out sooner or later.

I forgot to ask you for the piston i have already change my cylinder because i have a 494 mm inner barrel and my question is not all piston will work or it doesn't matter ?????

Thank

Skruface

January 15th, 2010 08:30

Just about any piston will work. There are a couple of pistons with oddball sizes (like those for some SR-25's), but any piston for a version 2/3 mechbox should be fine.

SGT_Blaster

January 15th, 2010 10:42

Quote:

Originally Posted by Skruface (Post 1142594)

Just about any piston will work. There are a couple of pistons with oddball sizes (like those for some SR-25's), but any piston for a version 2/3 mechbox should be fine.

Thank

All times are GMT -4. The time now is 07:26.