![]() |
Kraken Spring
Hey i was wondering what would be the best spring to lower the krakens fps to below 350 for cqb?
|
MS90 or (maybe) MS100. An MS100 *should* put it around 340 but could possibly be over 350.
|
Go for the MS 100, if it end up putting you at like 360, then turn it around, usually running non-linear springs the wrong direction can cut your FPS by as much as 30.
|
If you're using it for CQB, why risk putting it on the dot for 350? Pop an M90 in there and it should sit around 310 which is great for indoors. 340~350 can hurt a lot at point blank, and the "performance" differences from 310 to 350 within 50 feet are minimal to non-existent.
|
Quote:
|
I have an MS90SP in my C8. That, plus the bearing spring guide and tightbore net me a very consistent 325 with .2g. I run it mostly indoors and it's been awesome in every way. Outdoors I run it with .28 (about 270 fps) and it's been an awesome performer even out to beyond 125 feet.
|
Would this work? http://www.airsoftparts.ca/store2/in...roducts_id=884
|
Yep. That should be a perfect spring. It says 330 FPS right there and 350 IMO is a bit hot for CQB. Most places I know have limits of 330. If it's still shooting too hot just remember to flip the spring, more coils goes to back otherwise.
|
I'm assuming you play at XT, the FPS limit there is 350 so you will be just on the limit. Just remember, its a limit, not a goal.
|
A weaker spirng will cut some of the distance of the bb,but if you put a good inner barrel and hop up rubber you will gain in accuracy outweight the fps drop.
|
Quote:
|
my m16 run about 320fps and i'm still able to shoot .28 bb's and have the distance to reach out and touch someone,with only those minor upgrade and running a modify s90 spring.My friend as a kraken ak with the same set up and he makes me run for cover when he's shooting at me.Also a weaker spring will help lower the stress on you're gearbox internal.The kraken ak only has plastic bushings and the gear are not the same quality has the TM,CA,G&G,JG,etc...
|
And it's 320fps with .2 not .28.
|
All times are GMT -4. The time now is 10:18. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.