Airsoft Canada

Airsoft Canada (https://airsoftcanada.com/forums.php)
-   Gear Discussion (https://airsoftcanada.com/forumdisplay.php?f=26)
-   -   Cadpat helmet (https://airsoftcanada.com/showthread.php?t=56234)

veilside5 April 3rd, 2008 22:20

Cadpat helmet
 
Anybody has a picture of a PASGT helmet with a cadpat cover like this one: http://www.sealsactiongear.com/catalog/store/89.htm

but without the helmet band?

Does it looks good or not? Cause I think canadian helmet aren't PASGT right?

ww2warrior April 3rd, 2008 22:25

Canadian army's helmets looks more like mitch helmets than pasgt.

The issued forces helmet is the CG634.

http://hem.bredband.net/runmat/ca_cov.html

Crunchmeister April 3rd, 2008 22:27

Best I can show you in a picture is are these 2:

http://photos-452.ll.facebook.com/ph...083540_769.jpg

http://photos-c.ak.facebook.com/phot...17218_6032.jpg

That's one of the cheap ABBS PASGT helmets with an issue CADPAT cover. Really hard to see well in the first pic because of the goggle strap and all and by the bad angle on the second pic. I'd take another pic, but don't have that helmet cover anymore. The only cover I have is on a real CF helmet. Too much of a pain in the ass to remove it.

Chrios April 3rd, 2008 23:13

Are PASGT and CG634 covers exchangable on each others' helmets? Both myself and another guy were wondering that, and asking here is better than creating a new thread.

veilside5 April 6th, 2008 10:08

ok so I also found that helmet cover:

http://www.armyissue.com/Gallery/dis...ch&cat=0&pos=4

So in your opinion, that helmet cover with fit perfectly on a MICH TC-2000 helmet??

Thank for the answers!!

Crunchmeister April 6th, 2008 12:49

Quote:

Originally Posted by Chrios (Post 685663)
Are PASGT and CG634 covers exchangable on each others' helmets? Both myself and another guy were wondering that, and asking here is better than creating a new thread.

A PASGT cover will fit a CG634, but it's not perfect, and vice versa. I used duct take inside my PASGT to hold the CG634 cover on it tightly. It worked though, and looked good.

veilside5 April 16th, 2008 16:00

Ok so I've just found out that a PASGT helmet cover won't fit properly on a MICH TC-2000. Anybody know where I could find a CADPAT helmet cover that will fit? Or even better, a CF CG634 helmet?

Lerch April 17th, 2008 03:39

Helmet you say?

http://www.armyissue.com/Gallery/alb...AT%20cover.jpg

Sergeantmajor April 17th, 2008 08:03

any local surplus store should have a canadian helmet with its cover on it.

Zekk05 April 17th, 2008 16:53

for anywhere from 100 to 200$ though :(

Sergeantmajor April 17th, 2008 17:00

usually, i see them for...100-150$ but sometimes at 80$

Infidel April 17th, 2008 17:02

Thats because there arnt any Reproductions (that I know of) of the CG634 helmet.

~Grimm

ww2warrior April 17th, 2008 17:32

Cadpat helmet cover for mich helmet are availlable on Ebay, thats where i bough mine.

Phalanix April 25th, 2008 07:25

http://www.pbase.com/storeskeeper/image/79200869

PASGT helmet with a CADPAT cover. It's got a helmet band on though.

CamMu October 13th, 2009 11:26

Okay, I'm getting fed up with googling. Where can I buy real CADPAT helmet cover that would fit MICH-helmets? Used or not I don't care. Not eBay, please. Place that would ship to Europe. Thank's in advance.


All times are GMT -4. The time now is 06:48.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.