Airsoft Canada

Airsoft Canada (https://airsoftcanada.com/forums.php)
-   Airsoft Guns Discussion (https://airsoftcanada.com/forumdisplay.php?f=53)
-   -   Top and custom M4 companies (https://airsoftcanada.com/showthread.php?t=168997)

Burner1352 December 6th, 2014 23:01

Top and custom M4 companies
 
Hey everyone,

I'm wondering if you guys can tell me the top of the line companies and companies that make custom M4 aeg. I suck with the search on here so I am sorry if this has been asked before. On the custom side I'm looking for companies that you don't hear about often unless you have been in the game a long time or had a crazy build by them kinda thing. Thanks

ThunderCactus December 6th, 2014 23:06

Usually you just buy a base gun and modify it yourself or get someone to do it for you.

Danke December 6th, 2014 23:22

Redwolf makes/sells them.

Burner1352 December 6th, 2014 23:22

I thought so but wasn't sure, if there was a little guy shop kinda thing that does crazy work, or a company that is better then the TM, VFC sorta thing

brock0 December 6th, 2014 23:27

What do you mean "custom"?

Upgraded internals? An aftermarket rail system? A paint job? A gun doc could do that for you. No need for store.

Danke December 6th, 2014 23:27

There's this guy, https://www.facebook.com/AirsoftSurgeonOfficial

But for international stuff Redwolf is were to find his builds.

Burner1352 December 6th, 2014 23:34

I know of airsoft surgeon but as I see it's very hard to get most of it. Love the salient arms stuff, but it's never instock. Custom I mean I give him the budget I want to spend and they start building the rifle within the budget. External items I have and would move items over from current rifles I have. Hope this makes sense and sorry if it doesn't

Danke December 6th, 2014 23:37

Sounds like you just want a plain old gun doc. Check out the M4 thread and I think you'll see a few in there.

Burner1352 December 6th, 2014 23:38

Ok thank you. I will see of that points me in the direction I'm looking to go.

Burner1352 December 6th, 2014 23:43

You wouldn't happen to have a link right to that page do you?

Danke December 6th, 2014 23:45

http://www.airsoftcanada.com/showthr...139628&page=84

Burner1352 December 6th, 2014 23:47

Thanks again

Burner1352 December 6th, 2014 23:52

Is this all GBBR or aeg or both. I see a lot of GBBR is why I'm asking

Danke December 6th, 2014 23:58

Both.

L473ncy December 7th, 2014 00:01

So you want something like a custom tuning house like AMG, Ruf, Top Secret, Nismo, etc.?

You probably just want any gundoc. Hell I could even do externals. I actually once built up my own GBBR from off the shelf stuff (using the drop in GHK GBBBox). But everything external I picked out and put together. SWS Rail, 7.5" Outer barrel, VLTOR flash hider, Crane Stock, etc. I've got another project in the works too that you might call a "DMR" but I call it a Varminter or a Match rifle, as far as I can tell though I started it before the DMR craze it's just at someone elses place at the moment.

eg. As seen here, http://i.imgur.com/ceXHtZr.jpg


All times are GMT -4. The time now is 12:55.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.