HELP! G&G MP5 weird trigger problem
 

I have that G&G MP5, not even a year old, been gamed maybe 4 times. When fired on full auto, after 5-10 shots it stops shooting and I must press again on the trigger. Apparently it happens only when I push the trigger all the way down.

I never had this problem before with any of my guns. Kinda weird...

So if you know what to do or have a solid explanation feel free to message me!

THANKS!

Anything you know might help!

Why do you want to shot more than 5 shots at the same time???!! Is an MP5 not an M249...

Anyway it can be a lot of different things, the tappet plate, wiring, overheating...

Sounds like the trigger block is slipping over the trigger, that's why you have to reset. Slowly reset/release the trigger and listen for a click. If there's a click, that's the trigger block resetting on the trigger.

Could also be a cutoff lever issue.

trigger contact?

Something similar happened to my M4, The trigger post in the gearbox shell may have broken.

Most likely it's doing as Styrak said, the trigger sliding contact jumps over the trigger just like the cut-off lever would do in semi. I've had people coming in for this issue, most of the times I was able to just bend the slider's spring so it pushes more on the trigger itself.

thanks to everyone!

updates and clarification on problem;
-wire's not overheating
-trigger post not broken or bent
-trigger contact normal
-cutoff lever is fine

yes the trigger can make that ''click noise when pulled all the way down, didnt noticed it before.

I'll try what you said audi_bhoy

will update this post later with results