Airsoft Canada

Airsoft Canada (https://airsoftcanada.com/forums.php)
-   Doctor's Corner (https://airsoftcanada.com/forumdisplay.php?f=18)
-   -   G&P ak mag feeding issues (https://airsoftcanada.com/showthread.php?t=126461)

Nimble June 23rd, 2011 16:33

G&P ak mag feeding issues
 
Hi I have some G&P ak mags that arent feeding properly in my dboys ak74. In single fire they work fine but in full auto Im lucky to get 1 bb into the gun every 3-4 shots.. Someone on my team mentioned they had a similar issue with their mp5 and had to add a piece to the bottom of the spring to add some tension to it but once I got my mag apart I wasnt sure exactly what I should be doing so Im here for some expert advice. thanks -Eliot

Styrak June 23rd, 2011 16:47

Oil your mags. To do this, put 2 or 3 bb's into the mag. Then add a drop or two of silicone oil on top of the BB's, then load to full. Repeat this once or twice (WITHOUT adding more oil, just use the same oily BB's in the loader).

Add more oil when moving to a new mag. After you're done with all your mags, discard the oily BB's and you may want to clean out your loader.

Nimble June 23rd, 2011 17:08

Ill grab some oil and try it out thanks! So its not the spring?

Styrak June 23rd, 2011 17:17

Could be, but try this first. Unless they're really old mags it's probably not the spring.

Nimble June 23rd, 2011 17:52

Nope brand new! I was actually a little mad they didnt feed properly in full auto considering what I paid for 4 of them new vs. my mag brand ones that feed perfectly


All times are GMT -4. The time now is 19:23.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.