tm night warrior
 

Hi I recently got the tm night warrior and notice after a couple of mags through that every 2nd or third trigger pul is dead .
Not to sure want to adjust could it be the safety?

Thanks in advance

Need clarification on "...trigger pul is dead."

Does the hammer drop? Or does pulling the trigger fail to drop the hammer?

trigger pull
 

it just bottoms out and nothing happens
its like there is no release i'd say it is what you said "Or does pulling the trigger fail to drop the hammer"
its hard to explain

Sounds like the trigger disconnect lever is not properly slipping up behind the sear. Take it apart, and file a ramp in the back of the sear to allow the lever to fall in place.