Airsoft Canada - 1st Airsoft Project: build M4 from scratch

Page 2 of 2

Show 100 post(s) from this thread on one page

Airsoft Canada (https://airsoftcanada.com/forums.php)

- Newbie Tank (https://airsoftcanada.com/forumdisplay.php?f=203)

- - 1st Airsoft Project: build M4 from scratch (https://airsoftcanada.com/showthread.php?t=135206)

SchwabBAM

January 26th, 2012 16:44

I'm going with a MadBull DD 12.5" RIS so I'll probably have to get a PEQ box. I'm going for a look similar to an M4 RECCE.

PaddMadd

January 26th, 2012 17:35

If you were to run a 7" Midwest MCTAR-17 RIS, you can fit up to a 9.6V NiCad inside. It's not free-float(or 12"), but it's fairly solid if you do the modifications correctly, and saves rail space.

SchwabBAM

March 12th, 2012 16:47

So I've decided,

Bought a G&P C8A1 carbine from Toronto airsoft, I'm going to fit it with a tan battery crane stock and Madbull Daniel Defense Mk18 9.5" rail and a CAR-15 style flash hider. I'm just curious as to wheather or not the standard M4 barrel can accommodate the front sight post with an added 2.5"

ThunderCactus

March 12th, 2012 18:58

Quote:

Originally Posted by smack (Post 1591155)

I'm new to this and am looking into do a M4 build as well, are the bodys made form a T6 alloy and nicely anodized?

T6 is not an alloy, it's a heat treatment condition of aluminum

And when you can get a good, reliable, upgradeable, WORKING King Arms M4 for MUCH less than the $600 or so it's going to cost you to build an M4 from scratch, it's WAY cheaper to just buy a complete gun.
And you will have no headaches due to fitment issues or bran incompatibility.

All times are GMT -4. The time now is 01:45.

Page 2 of 2

Show 100 post(s) from this thread on one page